If you’re familiar with roofing nailers, then you know that they are the perfect replacement to hammer and nails. Instead of manually sticking each nail into a piece of wood, you can just use the best roofing nailer and do the same thing with the push of a button.
The roof of a house is one of the hardest things to make perfect. It should be at the right recline, the right angle, and built with the right materials.
If you butcher up even one of those many steps, there is a very good chance that the entire house could come crumbling down.
This is why it’s a good thing that the people in charge of the construction of houses are so good at what they do.
But, every good builder or construction worker needs to be equipped with the right tools and the right equipment to keep themselves as well as the rest of us completely safe.
Best Roofing Nailer 2020
Here are the best roofing nailers ranked, in order:
Bostitch RN46-1 ¾ Inch to 1 ¾ Inch Coil Roofing Nailer
Bostitch is a manufacturing firm that has been producing top of the line tools for all kinds of work settings, including the Bostitch RN46-1 ¾ Inch to 1 ¾ Inch Coil Roofing Nailer.
Therefore, whether you are a homeowner trying to improve a few things here and there about your home or a professional working in the construction business, Bostitch and their pretty wide array of equipment will never let you down.
With that being said, the Bostitch RN46-1 is one of the top-rated roofing nailers on the market. It is imported quality and so in demand that most places have run out of stock when it comes to this product. Still, this remarkable product does come with a very exclusive set of pros and cons. Let’s delve into them.
- The Bostitch RN46-1 Coil Roofing Nailer is extremely durable and lightweight.
- It is a coil-based roofing nailer and can work with exterior drywall as well as insulation board to name a few
- It contains a patented, one of a kind, side-load container that contains a depth of dive adjustment and performs extremely well in professional settings.
- It delivers a force of 410 in/lbs at 100 psi which is remarkable and capable of driving in 100 nails per minute at the very least.
- The contact tip works using a bouncing motion that is incredibly useful while working with roofs or similarly large areas.
- Comes with a dry fire lockout which prevents the device from going off if the tool runs out of nails.
- The Bostitch RN46-1 has the holding capacity of 120 coil nails and works with ¾ inch and 1 ¾ inch nails.
- Carbide steel insertion induces durability
- Higher nailing capacity through 120 nails
- Rotatable belt hook
- Sturdy magnesium housing
- Some reviewers complain that the manual is hard to understand for beginners
Hitachi NV45AB2 7/8 inch to 1 ¾ inch Coil Roofing Nailer
Hitachi is a trustworthy brand and the Hitachi NV45AB2 7/8 inch to 1 ¾ inch Coil Roofing Nailer is no exception!
Hitachi provides its consumers with professional-grade equipment that can provide a large variety of different applications. It is for this and many other reasons that Hitachi has achieved several firsts in the power tools industry and continues to do so.
Therefore, when Hitachi came out with the amazing NV45AB2 Side Loading best coil roofing nailer, it goes without saying that they had delivered nothing short of perfect. But as the case is with any good product, there are a few hits and a few near misses that make the product not as flawless as one would want it to be.
Here is a look at the pros;
- The Hitachi NV45AB2 Side Loading Coil Roofing Nailer is an amazing, one of a kind roofing nailer that is more than capable of delivering on its word.
- Not only does it have a tool-free depth of design functionality, but its bulletproof design makes it capable of bearing more than its fair share of hits and perform flawlessly.
- Able to work with asphalt roofing shingles as well as the insulation boards and is equipped with a side load magazine.
- Capable of working with an air pressure of 70 to 120 psi, the Hitachi NV45AB2 Side Loading Coil Roofing Nailer is capable of firing off 120 nails in one go.
- Weighing only 5.5 pounds, the Hitachi NV45AB2 Side Loading Coil Roofing Nailer is extremely lightweight which adds to its mobility.
- Easy to maneuver
- Powerful and long-lasting
- Rarely misfires, jams and recoils
- Convenient rubber gripping
- High capacity side load magazine
- Carbide inserts on the nose for smooth operation during operation
- Fast shooting
- Doesn't shit internationally
Senco Roof Pro 455XP Nailer With Actuation Trigger 3D0101N
According to its website, SENCO aims at making all sorts of hard work a whole lot easier. The Senco Roof Pro 455XP Nailer With Actuation Trigger 3D0101N is no exception.
They work hard and creatively to bring innovative changes of all sorts in the power tools industry. Their aim is to make the lives of men and women everywhere a whole lot easier and they certainly do deliver.
Durable, easy to use and is easy to hold, the Senco Roof Pro 455XP Nailer with Actuation Trigger 3D0101N is truly an outstanding power tool.
Yet, as it is will all good products, this one too is not without its very own set of flaws.
Here is a look at areas where Senco Roof Pro 455XP Nailer with Actuation Trigger 3D0101N peaks;
- Extremely easy to use and even easier to handle, the Senco Roof Pro 455XP Nailer with Actuation Trigger 3D0101N is essentially a work of art.
- The Senco Roof Pro 455XP Nailer with Actuation Trigger 3D0101N is not only easy to use but is also quite well known for its durability.
- It comes with a tool-free depth of drive that can be easily worked with.
- Depth can be adjusted without the need for any secondary tool
- Adjustable nail cannister
- Magazine capacity of 120 nails
- Case included
- The gun is prone to double or triple shots
Bostitch N80CB-1 Round Head inch Coil Framing Nailer
When it comes to construction equipment or anything that can make a builder’s life easier, the first company that comes to mind is Bostitch.
From roofing nailers, compressors, staplers, glue guns and so much more, Bostitch has just about everything that you need to get a project done a whole lot faster and a whole lot quicker.
The Bostitch N80CB-1 Round Head Coil Framing Nailer is one of a kind power tool because it has been dubbed to be extremely easy to use and even easier to handle.
But, just like any piece of construction equipment out there, the Bostitch N80CB-1 Round Head Coil Framing Nailer is also not without flaws. So, here is an insightful look into the product;
- Extremely useful and reliable. Works especially in commercial and industrial settings.
- Capacity to load 300 nails without having to reload the magazine. This makes this product quite efficient and helps save a lot of time.
- Fashioned from aluminum along with a composite canister, the Bostitch N80CB-1 Round Head Coil Framing Nailer is a tough and resilient piece of the equipment that can offer solid and unwavering reliability to its user.
- The teeth on the Bostitch N80CB-1 Round Head Coil Framing Nailer grips the lumber easily and firmly to keep from toe-nailing.
- Equipped with an adjustable deflector that keeps the exhaust away from the user’s face.
- Loading of new coils is super easy and more than quick.
- Capable of working with two types of nails i.e. 1 ½ inch and 3 ¼ inches full head nails.
- Large capacity magazine
- Coil framing nailer
- Contact trip trigger
- Heavier unit
Max CN445R2 SuperRoofer Roofing Nailer
Compared to other big wigs, Max maybe the new manufacturer on the block, but given the though and the attention that they put in their products certainly makes them one of the very best power tool manufacturers out there.
The Max CN445R2 SuperRoofer Roofing Nailer has quickly become a big hit by packing quite a lot of kick and punch in its compact body.
So, let’s take a deeper look at Max CN445R2 SuperRoofer Roofing Nailer is made of:
- With a tar resistant nose, the Max CN445R2 SuperRoofer Roofing Nailer is capable of resisting and withstanding four times more the amount of tar than any other roofing nailer out there.
- Equipped with a specialized end cap filter allows the Max CN445R2 SuperRoofer Roofing Nailer to remain dirt-free with its filter capability to catch dirt with size in microns.
- It also comes with a tool-free depth control dial that prevents the nails from penetrating the surface too deep and losing purpose.
- It is durable and uses an air compressor to be operational.
- The trigger lock stops the device from shooting when not in use
- Nose magnet holds nails in place before shooting
- The nose resists 4x more tar than traditional tools
- Nails are pushed smoothly by the round driver blade
- Tool-free depth of drive adjustments
- Warranty only lasts a year
How Does a Roofing Nails Gun Work?
Similar to a drill or a gun, the very first roofing nail gun had the capacity of firing off 40 to 60 nails per minute and the number has been steadily growing ever since.
They not only help speed the process of getting shingle on the roof a whole lot quicker but they also make the entire process a whole lot easier.
Now, you no longer have to climb onto the roof with a pack of nails and a hammer to work, all you need is one of the best roofing nailers and you are completely sorted!
Things to Keep in Mind While Buying Roofing Nailer
There are only two reasons why someone will be moved to make the purchase of the best roofing nailer – either they have an art project they are passionate about, like building a treehouse or taking on the task of setting in shingles to countless roofs per year.
Whatever the case may be, when you have countless nails at hands that you need to hammer in place, then purchasing a roofing nailer is the best course of action for you.
For a professional who knows what he or she wants, purchasing the top-rated roofing nailer is simple.
On the other hand, for a homeowner who is not that well versed, especially when it comes to the know-how of purchasing the best roofing nailer, it may be more difficult.
Therefore, here is a precise look at everything that that you need to know in to purchase your very own roofing nailer.
Reason for Purchase
Sometimes, it is not only about the cost or the durability of the roofing nailer you for looking to purchase; it is more about the sort of project you need it for.
If you want to create a couple of birdhouses for the country fair or build a treehouse for your kids, then you need the best roofing nailer that can provide you with enough of this sort of one-time support.
On the other hand, if you are looking for the type of roofing nailer that can be used with ease on a commercial level, then you need to do some serious thinking before the purchase.
Not all roofing nailers are the same and the purchase of one should be carefully based on your needs.
A roofing nailer is essentially a nail gun which means the nails going into the gun need to be in a magazine of sorts.
Depending on the use and the type of roofing nailer you are using, there are two types of magazines in circulation i.e. the coil and the stick.
As the name suggests, the coil contains somewhere between 150 to 350 nails arranged in a circular coil. The stick magazine is a straight stick of nails that go inside the gun and contains only 20 top 40 nails.
Now, for commercial and regular use, using a coil is better since it is easy to maneuver and handier but if you have a small project then the cheaper stick magazine is more up your speed.
A roofing nailer isn’t just to apply shingles on the roof at supersonic speed.
There are multiple applications that one can get out a regular good old set of roofing nailers.
It can also be useful at nailing down floorings, taking care of cabinets and moldings to name a few.
Therefore, considering the various ways you might need to utilize a roofing nailer, there are a number of applications for it and this should play a huge role in the decision of purchasing the perfect roofing nailer for you.
There are two types of power sources that a roofing nailer typically uses. One is pneumatic where an air compressor along with hoses is used to power the roofing nailer.
The other works through a cordless cartridge that provides the gun with a tiny gas ignited spark that drives the nail into the surface.
While air compressors are ideal if you would like to use the item commercially or for a very large project, the cordless gas cartridge can come in really handy in places where mobility is key.
Apart from the aforementioned factors, there are certain key features that differentiate one roofing nailer from another.
Some of these features give certain roofing nailers a slight edge in the competition while becoming the doom for others.
For instance, if you are using an air compressor to power the gun, then having a swivel tube connector would be great. Other key features include;
Choose a gun that allows easy access to the nail feed. This way, if a nail ever gets jammed you can access the nail feed quite easily to remove it and not suffer from a lot of lag time.
Another thing that makes for the best roofing nailer is the ability to control the depth the needle goes to once inserted into the material. This ability can help builders use a roofing nailer on more things apart of applying shingles on the roof.
If you are working on a project that requires you to work with various different sizes of nails, then be sure to look for a roofing nailer than can work with various different sizes of nails.
By now, you should know what a roofing nailer does and have an insight into some of the best roofing nailers on the market.
Rest assured that now you are a most likely pro about everything there is to know about roofing nailer.
The Top Review Zone team has chosen the Bostitch N80CB-1 Round Head Coil Framing Nailer as their best roofing nailer because of it’s the capability to take on a variety of large-scale projects such as roofing, subflooring, and decking.
The manufacturers at Bostitch designed the N80CB-1 to tackle some of the toughest jobs in the industry, and they certainly succeeded!
Now, all you have to do is use all the knowledge you have gained and apply it to the purchase of a brand new roofing nailer of your own.
You have some amazing options to choose from right up there but, if you feel like it, you can always venture out into the big world and choose one for yourself.
What’s your favorite roofing nailer?
Share this post, tag a friend and leave your thoughts in the comment section below!
Share the Love
If you found this post useful, please let others know about it by sharing it.